You are here:Home-Gate Driver Evaluation Products

In Stock! Power Integrations Reference Design: RDHP-1901

2019-11-09T15:41:27-06:00November 9th, 2019|Categories: Featured, Gate Driver Evaluation Products, Power Integrations|

Key features of this new general-purpose base board for SCALE-iDriverTM SIC1182K include: Suitable for SiC-MOSFET power modules in 62mm housing with a maximum blocking voltage of 1200 V Two channels for half-bridge modules Short Circuit Detection Advanced Active Clamping Electrical command inputs and status outputs 0 V/5 V command input logic 0 V/5 V

Wolfspeed CGD12HBXMP

2019-07-29T17:53:40-06:00July 29th, 2019|Categories: Featured, Gate Driver Evaluation Products, Wolfspeed|

Evaluation Gate Driver Tool Optimized for the XM3 Module Platform Wolfspeed’s CGD12HBXMP is a form-factor-fitting, two-channel gate driver for the XM3 power module platform. Each of the two gate drive channels is protected against over-current and reverse polarity. On-Board 2 W isolated power supplies supporting 80 kHz switching frequency. Features: Optimized for Wolfspeed’s high-performance

Half-Bridge Gate-Drive Power Supply Reference Design

2018-07-29T14:55:01-06:00July 29th, 2018|Categories: Featured, Gate Driver Evaluation Products, RECOM|

RECOM's R-REF01-HB consists of a half-bridge suitable for voltages up to 1kV and a fully-isolated driver stage with isolated power supplies for the low-side and the high-side switching transistors. It is suitable for single gate drive supply voltages as low as +4V as well as dual gate drive supply voltages as high as +20V /