CP4012D: High-performance 20 fin/inch In-Line Pin x 4mm tall double-sided cold plate. For 6 modules (3/side). SAEJ1926-6 port. The CP4012D aluminum friction stir welded cold plate has been optimized specifically for the high heat flux of silicon carbide. The MDT (micro deformation technology) inside allows for very low thermal resistance, low-pressure drop, and balanced parallel
High-performance, Scalable and Customizable Cold Plates Wieland Microcool 4000 Series cold plates are the next evolution of their standard cold plate line. The 4000 series are designed to fit the most common power electronic footprints and can be easily customized for other needs. The CP4009 and CP4012 series cold plates highlighted below have been optimized
3000 series coldplate for the Wolfspeed XM3 module The CP3012 aluminum friction stir welded coldplate has been optimized specifically for the high heat flux of silicon carbide. The MDT (micro deformation technology) inside allows for the very low thermal resistance, low pressure drop and balanced parallel flow. LEARN MORE!
Advanced Thermal Solutions IGBT cold plates from Richardson RFPD have unmatched thermal performance because of their mini-channel fin design. The ATS-CP family of cold plates, at a flow rate of 4 L/min, can transfer 1kW of heat between 5.0°C – 7.0°C temperature difference between the cold plate base and inlet fluid temperature, depending on
Exposed Tube Wakefield-Vette’s exposed tube liquid cold plates from Richardson RFPD ensure minimum thermal resistance between the power device and the cold plate by placing the coolant tube in direct contact with the power device’s base. Direct contact reduces the number of thermal interfaces between device and fluid thus increasing performance for the application.