You are here:Home-Wieland Microcool

Wieland Microcool 4000 Series Cold Plates

2021-03-16T10:46:16-05:00March 16th, 2021|Categories: Featured, Liquid Cold Plate Heat Sinks, Wieland Microcool|

High-performance, Scalable and Customizable Cold Plates Wieland Microcool 4000 Series cold plates are the next evolution of their standard cold plate line. The 4000 series are designed to fit the most common power electronic footprints and can be easily customized for other needs. The CP4009 and CP4012 series cold plates highlighted below have been optimized

Video: Wieland Microcool Micro Deformation Technology (MDT) for Direct Cool Modules

2021-02-09T11:19:15-06:00February 9th, 2021|Categories: Featured, Video, Wieland Microcool|

Watch video of Wieland Microcool's Micro Deformation Technology in action. MDT technology is highly flexible and can create a wide variety of fin, pin and micro-channel geometries without the need of time-consuming tool change.

Increasing Power Density In Three-Phase Inverters With Direct-Cooled SiC Power Modules

2020-10-21T15:26:31-05:00October 21st, 2020|Categories: Article, Featured, Wieland Microcool, Wolfspeed|

Current trends in electrification are placing increasing demands on the power electronics for improved efficiency, higher power capability and higher power density. Since these demands apply to systems, the requirements extend down to the component level. Silicon carbide (SiC) is poised to rapidly replace silicon (Si) in many applications due to the higher performance characteristics

Wieland Microcool CP3012-STD

2020-02-12T15:14:19-06:00February 12th, 2020|Categories: Featured, Liquid Cold Plate Heat Sinks, Wieland Microcool|

3000 series coldplate for the Wolfspeed XM3 module The CP3012 aluminum friction stir welded coldplate has been optimized specifically for the high heat flux of silicon carbide. The MDT (micro deformation technology) inside allows for the very low thermal resistance, low pressure drop and balanced parallel flow. LEARN MORE!

Go to Top